1 |
2021 |
Manu Harilal, R. P. George, John Philip & Shaju K. Albert |
Binary blended fly ash concrete with improved chemical resistance in natural and industrial environments |
Environmental Science and Pollution Research, 28, 28107-28132 |
2 |
2021 |
Manu Harilal, Deepak K. Kamde, Sudha Uthaman, R.P. George, Radhakrishna G. Pillai, John Philip, Shaju.K. Albert |
The chloride-induced corrosion of a fly ash concrete with nanoparticles and corrosion inhibitor |
Construction and Building Materials, 274, 122097 |
3 |
2021 |
Divya Rachel Rooby T. Nanda Kumar, Manu Harilal, S. Sofia, R.P. George, John Philip |
Enhanced corrosion protection of reinforcement steel with nanomaterial
incorporated fly ash based cementitious coating |
Construction and Building Materials, 275, 122130 |
4 |
2020 |
P. K. Mandal, John Felix Kumar, Merrin John Varkey |
Effect of artificial ageing treatment and precipitation on mechanical
properties and fracture mechanism of friction stir processed MgZn2 and
Al3Sc phases in aluminium alloy |
Materials Today: Proceedings |
5 |
2020 |
P. K. Mandal, Jithin Devasia, Mebin T. Kuruvila |
Characterization of fine precipitates evolution in post ageing treatment after friction stir processed 7075Al Alloy |
International Journal of Engineering Research & Science (IJOER), Vol.- 9, Issue- 2, 2020, pp. 1-11 |
6 |
2020 |
Manu Harilal, B. Anandkumar, B. B. Lahiri, R. P. George, John Philip and Shaju K. Albert |
Enhanced biodeterioration and biofouling resistance of nanoparticles and inhibitor admixed fly ash based concrete in marine environments |
International Biodeterioration and Biodegradation, 155, 105088 |
7 |
2020 |
Vyshak T P, Rohith sankar, Akhil Babu C, Manu Harilal and Jithin Devasia |
A review on Heating and Rolling Effect of AZ31 Magnesium Alloy |
International Research Journal of Engineering and Technology (IRJET), 7, 4878-4883 |
8 |
2020 |
Sheetal S, Abhay Prakash, Yedhukrishna Raj, Manu Harilal and John Felix Kumar |
A review on the Enhanced Corrosion Control of Mild Steel in an Acidic Medium using Green Inhibitors |
International Research Journal of Engineering and Technology (IRJET), 7, 4085-4093 |
9 |
2020 |
Saikiran Amruthaluru, Siva Kumar Mamidi, Manu Harilal, Hariprasad Sampatirao and Rameshbabu Nagumothu |
Synthesis of Carbonate and Fluorine Substituted Nanocrystalline Hydroxyapatite by Mechanochemical Method |
Key engineering materials, 833, 204-208 |
10 |
2020 |
Anirudhan B T; Jithin Devasia; Tejaswin Krishna, Mebin T Kuruvila |
Manufacturing of a bimetallic structure of Stainless Steel and Mild Steel through Wire Arc Additive Manufacturing – A critical review |
IJISRT (International Journal of Innovative Science and Research Technology, Volume 5 - Issue 6 |
11 |
2020 |
Mebin T Kuruvila, Abhijith Reman; Swethish Santhosh; Sachin Chandy Chacko |
A Review on the Processes involved in the Manufacturing and Fabrication of HMMCs and Subsequent Change in its Properties |
IJISRT (International Journal of Innovative Science and Research Technology, Volume 5 - Issue 6 |
12 |
2019 |
P. K. Mandal, Mebin T. Kuruvila, Jithin Devasia |
Mechanism of Fracture in Friction Stir Processed Aluminium Alloy |
International Journal of Engineering and Management Research, Vol.- 9, Issue- 6, Dec. 2019, pp. 69-76 |
13 |
2019 |
P.K. Mandal, John Felix, Merrin J. Varkey, Vishnu KC |
Effect of Scandium on Homogenization Treatment and Friction Stir Processing on Mechanical Properties of 7075 Aluminium Alloy Prepared by Foundry Route |
Materials Science and Engineering, 577, pp.1-10 |
14 |
2019 |
PK Mandal, Manu Sam Mathews, Benjamin A Daniel and Jithin Devasia |
Effect of ageing treatment on microstructure and mechanical properties of α+β type titanium alloy used for biomaterials |
Materials Science and Engineering, 561, 2019, pp.1-9 |
15 |
2019 |
P. K. Mandal, John Felix Kumar |
Investigation of Precipitation Behavior and Related Micro structural and Mechanical Properties after FSP of Aluminium Alloy |
International Advance Journal of Engineering Research, Vol. 2, Issue 11, pp. 15-19 |
16 |
2019 |
P.K. Mandal, John Felix, Vishnu KC |
Effect of heat treatment and microalloying element on the microstructure and properties of HSLA steels |
Indian Foundry Journal, Vol. 65, Issue 12, pp. 24-28 |
17 |
2019 |
Manu Harilal, VR Rathish, B Anandkumar, RP George, MS Haji Sheikh Mohammed, John Philip, G Amarendra |
High performance green concrete (HPGC) with improved strength and chloride ion penetration resistance by synergistic action of fly ash, nanoparticles and corrosion inhibitor |
Construction and Building Materials, 198, 299-312 |
18 |
2019 |
Sudha Uthaman, RP George, Vinita Vishwakarma, Manu Harilal, John Philip |
Enhanced seawater corrosion resistance of reinforcement in nanophase modified fly ash concrete |
Construction and Building Materials, 221, 232-243 |
19 |
2019 |
M. Harilal, Sudha Uthaman, B. Anandkumar, B.B. Lahiri, R.P. George, John Philip and G. Amarendra |
Fungal resistance of nanomodifiers and corrosion inhibitor amended fly ash concrete |
International biodeterioration and biodegradation, 143, 104725 |
20 |
2019 |
Manu Harilal, Sudha Uthaman, RP George, B Anandkumar, C Thinaharan, John Philip, U Kamachi Mudali |
Enhanced anti‐microbial activity in green concrete specimens containing fly ash, nanophase modifiers, and corrosion inhibitor |
Environmental Progress & Sustainable Energy, 38, 13102 |
21 |
2019 |
PK Mandal and John Felix Kumar |
Investigation of Precipitation Behavior and Related Micro structural and Mechanical Properties after FSP of Aluminum Alloy |
International Advance Journal of Engineering Research 2/11/15-19 |
22 |
2019 |
P.K. Mandal, John Felix, Merrin J. Varkey and Vishnu KC |
Effect of Scandium on Homogenization Treatment and Friction Stir Processing on Mechanical Properties of 7075 Aluminium Alloy Prepared by Foundry Route |
IOP Conf. Series: Materials Science and Engineering, 577 (2019) 012088 |
23 |
2019 |
P. Muthukumar, S. Jerome, R. John Felix Kumar and S. Prakash |
Fabrication of Surface Composite by Friction Stir Processing Using a Novel Direct Particle Injection Tool |
Surface Review and letters, 26/2019/1850182 1-11 |
24 |
2018 |
P.K. Mandal |
Effect of FSP on Strength And Fracture Toughness of Aluminium Alloy 7000 |
Applied Mechanics and Materials, Vol. 877, Feb. 2018, pp. 20-25 |
25 |
2018 |
P K. Mandal |
Grain Refinement Mechanism and its Effect on Strength and Fracture Toughness Properties of Al-Zn-Mg Alloy |
Proceedings of Fatigue, Durability and Fracture Mechanics, Lecture Notes in Mechanical Engineering. pp. 223-236 |
26 |
2018 |
Manu Harilal, A Saikiran, N Rameshbabu |
Experimental Investigation on Synthesis of Nanocrystalline Hydroxyapatite by the Mechanochemical Method |
Key Engineering Materials, 775, 149-155 |
27 |
2018 |
Prakash, John Felix Kumar and Jerome |
Effect of heat treatment on microstructure and mechanical properties of CMT welded Aluminium alloy 2024 |
Materials Today: Proceedings, 5, 26997-27003–27003 |
28 |
2018 |
Anbarasan, S.Jerome and John Felix Kumar R |
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Inconel 718 |
Materials Today: Proceedings, 5 (2018) 7716–7724 |
29 |
2017 |
P K Mandal |
Heat Treatment and Friction Stir Processing Effects on Mechanical Properties and Microstructural Evolution of Sc Inoculated Al-Zn-Mg Alloys |
Materials Science and Metallurgy Engineering, Vol.4, No. 1, pp. 16-28 |
30 |
2017 |
P.K. Mandal, R. Anant, R. Kumar, V.M.R. Muthaiah |
Effect of scandium on ageing kinetics in Al-Zn-Mg alloys |
Materials Science & Engineering A, 696, 2017, pp. 257-266 |
31 |
2017 |
P K Mandal |
Investigation of Microstructure and Mechanical properties of Al-Zn-Mg and Al-Zn-Mg-Sc Alloys After Double Passes Friction Stir Processing |
International Journal of Materials Science and Engineering, Vol.5, No. 2, pp. 47-59 |
32 |
2016 |
P K Mandal |
Study on GP-Zones Formation in the Sc Inoculated Ternary Al-Zn-Mg Alloys |
Journal of Materials & Metallurgical Engineering, Vol.6, Issue 2, pp. 53-69 |
33 |
2016 |
P K Mandal |
Experimental investigation on microstructure and mechanical properties of Al-Zn-Mg-Sc alloys. |
International Journal of Mechanical and Production Engineering Research and Development, Vol.6, Issue 2, April 2016, pp. 65-76 |
34 |
2016 |
P K Mandal |
Experimental Analysis of Microstructure and Mechanical Behaviour in Fine Grained Al-Zn-Mg Alloy |
International Journal of Scientific Research in Science, Engineering and Technology, Vol. 2, Issue 1, 2016, pp. 519-526 |
35 |
2016 |
P K Mandal |
Effect of Small Addition of Sc In Artificially Aged of Cast Al-Zn-Mg Alloy |
International Journal of Technology Enhancements and Emerging Engineering Research, Vol. 4, Issue 2, 2016, pp. 27-31 |
36 |
2016 |
P K Mandal |
Characterisation and Modeling of Precipitation Kinetics in 7075 Al-Zn-Mg Alloy |
International Journal of Modern Engineering Research, Vol. 6, Issue 2, 2016, pp. 33-48 |
37 |
2016 |
P K Mandal |
Microstructural Refinement Through Sc Inoculation and Its Effect on Mechanical Properties of As-Cast 7XXX Series Al alloys |
International Journal of Engineering Research and Development, Vol. 12, Issue 2, 2016, pp. 16-19 |
38 |
2016 |
P K Mandal |
Study on hardening mechanisms in aluminium alloys |
International Journal of Engineering Research and Applications, Vol. 6, Issue 1, (Part-6), 2016, pp. 91-97 |
39 |
2016 |
P K Mandal |
Fine-Grained Cast Aluminium Alloy Produced In Situ By Friction Stir Processing |
International Journal of Engineering Research and Development, Vol. 12, Issue 1, Jan. 2016, pp. 33-39 |
40 |
2016 |
P K Mandal |
A refined energy-based model for friction stir processing of Al-Zn-Mg Alloy |
International Journal of Engineering Research and Applications, Vol. 6, Issue 1, (Part-2), Jan. 2016, pp. 40-47 |
41 |
2016 |
P.K. Mandal, Alex Joseph, Colin Siby, Jithin Devasia |
Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of Ti-Al-V for alloy structural and Biomedical Applications |
Indian Foundry Journal, Vol. 65, Issue 3, March 2019, pp. 49-54 |
42 |
2016 |
S Hariprasad, M Ashfaq, T Arunnellaiappan, Manu Harilal, N Rameshbabu |
Role of electrolyte additives on in-vitro corrosion behavior of DC plasma electrolytic oxidization coatings formed on Cp-Ti |
Surface and Coatings Technology, 292, 20-29 |
43 |
2016 |
Jithin Devasia, Rijesh M |
Production of Al-Al2O3
MMC by P/M Route and to Study the
Feasibility of Fusion Welding |
American Journal of Materials Science,vol 6,pp 99-101 |
44 |
2016 |
Kevin Davis, Jeevan James, Melvin Abraham, Stephen George Raju and K.G. Samuel |
Effect of welding voltage on microstructure and transition temperatures of MIG welded EN 8 steel weldments |
International Journal of Advance Engineering and Research Development, 3(1), (2016), 122-126 |
45 |
2016 |
Jordan Lewis, Karthik B. M, Joswin Maxim Lobo, James Valder, Rijesh M |
Fabrication of an Automated Collison Avoidance System Using Ultrasonic Sensor |
Journal of Mechanical Engineering and Automation, Volume 6, No 5A, 97-101 |
46 |
2016 |
Rijesh M, James Valder, Jithin D, Dileep C. R, Abin R. N, Shibin F, Havila M. M |
Production of Al-Al2O3 MMC by P/M Route and to Study the Feasibility of Fusion Welding |
American Journal of Materials Science, Volume 6, No 4A, 99-101 |
47 |
2016 |
K Jayaprakash, B.T. Nandish, M. Rijesh, Jaganath Nayak, Sachin M. Bhat, K. Harish Kumar Shetty ,A. Nityananda Shetty and Sudeendra Prabhu |
Fabrication of Hair and Copper Fiber Reinforced Polymethyl Methacrylate (PMMA) Composites and Evaluation of Their Mechanical Properties, Thermal Conductivity and Color Stability for Dental Applications |
Trends in Biomaterials & Artificial Organs, Vol 30, No 1, 8-12. |
48 |
2015 |
Kurian Antony, M. Siva Prasad |
A Comparison of Corrosion Resistance of Stainless Steel Fabricated with Selective Laser Melting and Conventional Processing |
International Journal of ChemTech Research, 7(6), (2015), 2632-2635 |
49 |
2014 |
C.K. Mukhopadhyay, C. Phaniraj, T. Jayakumar and K.G. Samuel |
Study of tensile behaviour of thermally aged alloy D9 wrapper tubes of fast breeder reactor using acoustic emission |
Strength, Fracture and Complexity 8 (2013/2014) 219–229 |
50 |
2015 |
T. S. Shanon, N. Ahmed, M. Bharath, J. Valder, M. Rijesh |
Post-ECAP Ageing Treatment of Aluminum 6063 Alloy |
American Journal of Materials Science 5(3C), (2015), 74-76 |
51 |
2011 |
K. G. Samuel, G. Sasikala and S. K. Ray |
On R ratio dependence of threshold stress intensity factor range for fatigue crack growth in type 316(N) stainless steel weld |
Materials Science and Technology 27 (2011), 371-376 |